Gear Pump – Continuous Duty
- BASIC DESIGN FEATURES
- Max. pressure: 125 psi
- Mechanical seals
- Shaft ball bearings
- Max. viscosity: 500 SSU
- Self-priming
Gear Pump – Continuous Duty
- Application
- Transfer a wide range of nonabrasive or nonparticulate viscous liquids with a continuous, near-pulseless flow in many industrial, commercial, marine, or agricultural applications.
- All have keyed shafts, a seal flush chamber.
- Cast-iron and bronze models have pressure relief valves. Ball bearings allow use with pulley-drive systems.
Note: Higher-viscosity liquids (100,000 SSU) must be transferred with more horsepower at reduced speeds.
- POSITIVE DISPLACEMENT PUMPS
- CAST-IRON
Pedestral Gear Pump – Continuous Duty Max. temp.: 280°FSteel spur gears handle oil-based fluids. Viton® mechanical seals with carbon-on-ceramic faces provide good resistance to compatible chemicals. Other wetted materials are: cast-iron, steel, and Hilite-55.
- BRONZE
Pedestal Gear PumpMax. temp.: 210°FFortonPPS spur gears are designed to transfer waterbased liquids with no metal-to metal contact for quieteroperation and good chemical compatibility. Buna N mechanical seals with carbon-on-ceramic faces. Other wetted materials include: bronze, brass, graphite, and Cellulose gasket,as well as 304 and 18-8 stailless steel.
- 316 STAINLESS STEEL
Max. temp.: 280°FForton® spur gears provide quiet operation and good chemical resistance, with no metal-to-metal contact.Viton® mechanical seals with carbon-on ceramic faces and flush chamber to increase pump efficiency. Other wetted materials include: 316 stainless steel, carbon graphite, and Forton.
